Verdampfer for disposable buyers: what works (90 W)
Verdampfer advice for Beijing, covering throat hit, what to look for and where the trade-offs actually sit.
Finding the right verdampfer in Beijing is easier than most catalogues make it sound. Charging over USB-C takes about 89 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
The gap between a mid-range and a premium verdampfer narrows once you know which components you actually use. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock.
Pricing in Beijing shifts with import duty, so the figures here reflect current CNY rates rather than a fixed list price. Airflow control on the Vapouriz Max is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 25, and pushing beyond that adds heat rather than anything worth carrying.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber. The Crimson Red finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
The build quality on Vapouriz Max is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Crimson Red finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Battery behaviour is where the Vapouriz Max earns its keep: the 800 mAh cell holds a usable charge for most of a day at 25 and recharges over USB-C. We would pair the Vapouriz Max with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock.
The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 30:70 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Vapouriz Max |
|---|---|
| Brand family | RELX |
| Battery capacity | 800 mAh |
| Power range | 25 W |
| Liquid capacity | 2.5 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 50 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | zinc alloy |
| Charge port | USB-C |
| Connector | 510-X |
| Airflow | fixed |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Blueberry Muffin: creamy, sweet, described as baked blueberry with a soft crumb. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Beijing
Availability in Beijing is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the USB-C are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and CNY rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
